November 22, 2026
Creative Specs for Projection Advertising
The worst moment on a projection night is opening the file.
The crew is in position. Power is run. Darkness has arrived. And the content that has just been handed over is a brand film cut for a phone screen, in a dark cinematic grade, with a logo that lives in the bottom corner, delivered in a format the playback machine does not want.
Nobody did anything wrong in the usual sense. The creative team built a good piece of work against the brief they were given. The brief just was not a projection brief.
Projection is an unusual medium. It has no black, it has a canvas with holes in it, it is viewed from angles nobody chose, it competes with street lighting, and its screen is made of brick. Content that ignores those facts fails in predictable ways.
This is the spec guide our crews wish every client had before the artwork started. It is written for the people making the content as much as for the people buying it.
The first principle: black is not a colour
Everything else follows from this, so it goes first.
A projector adds light. It cannot remove it. Where your artwork is black, the projector is simply not contributing anything, and the viewer sees whatever the wall looks like on its own. On a lit street, that means the wall stays visible.
So black in projection is transparency. It is a hole in your image through which the building shows.
This is enormously useful if you understand it and ruinous if you do not. Understood, you can let a building’s shape form part of the composition, keep the image clean, and avoid the halo of a visible rectangle floating on a facade. Misunderstood, you deliver a dark moody grade and wonder why half the frame did not appear.
The practical consequence: content should be designed as light on darkness rather than as a picture with dark areas. Think of it like stained glass with a lamp behind it, not like a print.
Contrast and tonal range
Projection has a far narrower usable tonal range outdoors than a screen does, and the range sits at the bright end.
High contrast wins. Strong separation between the lit elements and the unlit background is what makes an image read from across a street.
Mid tones are where content goes to die. A composition built largely of mid greys and muted colours will look soft and weak on a wall even when it looks sophisticated on a monitor. If you squint at the artwork and it turns into a single grey mass, it will do the same on the building.
Subtle gradients rarely survive. Between surface texture, ambient light variation across the facade and the viewing distance, gentle tonal transitions flatten out.
Pure white is your strongest asset. It is the brightest thing the system can produce, and it should be used where you want the most presence. Clients are sometimes reluctant because large white areas feel blunt in a design review. On a wall at night they are what works.
Saturated colour is dimmer than white, inherently, because producing a saturated colour means removing part of the spectrum. A design that is predominantly deep blue or deep red will read noticeably dimmer than an equivalent design built on white, from identical equipment on the identical wall. Plan the palette with that in mind and use saturated colour as accent rather than as the whole field.
The wall tints everything
The surface colour mixes into every pixel you project.
On a red brick wall, projected white reads pink, projected red barely registers as distinct from the surface and cool colours shift warm. On a pale cream render the full range is roughly available. On a blue grey concrete panel, warm colours go muddy.
So the palette has to be chosen against the specific wall, not in the abstract. A brand palette that works beautifully in print can be the wrong palette for a given facade, and the sensible response is to select the portion of the palette that survives rather than to insist on all of it.
Crews supply a photograph of the actual surface, taken at night, as part of the content brief for exactly this reason. Designing against a generic grey rectangle in a design application is how palettes get chosen that cannot work.
A useful habit: take the artwork, overlay it at low opacity onto a photograph of the real wall, and look at it small. That rough preview catches most palette problems before production.
Type, scale and legibility
Type is where the majority of projection content fails, and the failures are consistent.
Type must be large. The viewing distance for a building projection is typically the width of a street plus, and viewers are often moving. Anything that requires effort to read will not be read.
Type must be heavy. Thin and light weights disappear. The stroke has to be thick enough to survive the surface texture, the ambient light and the slight softness that any real world projection has at the edges of the frame.
Type must not sit across texture that breaks it. On brick, mortar joints run through letterforms. Large heavy type reads over that happily. Small or fine type does not. If the surface is textured, type size has to be set against the texture scale rather than against the frame.
Word count should be brutal. A projection is glanceable outdoor media. A few words, held long enough to be read by someone walking past at normal pace, beats a paragraph nobody finishes.
Avoid placing anything essential near the frame edges. Keystone correction, masking around obstructions and the practicalities of fitting an image to a usable wall area all mean the exact edges of your frame may not survive. A generous safe area in the middle of the composition is where the message belongs.
And set type against the real background it will sit on, not against a flat colour in a layout file.
Composition against a canvas with holes
Unlike a billboard, a projection canvas is rarely a clean rectangle.
There will be windows, which are voids. There will be downpipes, conduit and brackets casting shadow lines. There may be a fire escape. There may be a section of wall washed out by a streetlight. There may be a colour change where the building was repaired.
Good projection content is composed around this. The crew survey produces a map of the usable area, and the artwork should be built to that map.
If the elevation gives three clean panels between windows, build the piece as three panels. If the only genuinely strong area is the upper two thirds, put the content there and let the lower section stay dark rather than fighting the street lighting.
Centring a logo over a downpipe is the kind of mistake that is obvious on site and invisible in a layout application.
This is also where the distinction between flat projection and mapped content matters for the creative team. Flat content is a frame placed on a wall. Mapped content is composed against the building’s actual geometry. Those require different briefs, and a creative team should know which one they are making before they start.
Motion, pacing and loop behaviour
Projection content is almost always moving, and movement has its own rules outdoors.
Slow is better than fast. The audience is not seated and attentive. They arrive mid sequence, glance, and move. Fast cutting means most viewers see fragments of something they cannot assemble.
Hold the key frames. Whatever the single most important image is, whether that is a logo, a product or a line of copy, it needs to be on the wall long enough for a passing glance to land on it. Flashing past it once per loop wastes the whole piece.
Avoid relying on narrative sequence. A viewer who catches thirty seconds of a two minute story will not understand it. Each portion of the content should stand alone.
Camera-style movement can be disorienting at architectural scale. What feels like a gentle push on a monitor becomes a large motion across a building facade. Restraint reads better.
Full frame brightness changes are noticeable to the whole street. A sudden cut from a bright frame to a dark one effectively switches the building off and on, which is attention grabbing once and irritating repeatedly.
Loops should be seamless, with no visible jump at the join and no title card style beginning that implies the viewer missed something.
The technical handover
This is the part that causes avoidable delays on site, and it is entirely preventable.
Talk to the crew about deliverable format before producing the content, not after. Playback requirements vary with the setup being used, and a short conversation at the start removes every surprise at the end.
Aspect ratio should match the actual image area the location supports, which the survey determines. Producing content at a standard screen ratio and then fitting it to a wall of a different proportion means either bars, cropping or distortion, and all three are avoidable.
Resolution should suit the image as it will be projected. Oversupplying resolution is harmless. Undersupplying it is visible as softness, particularly in type.
Deliver a version with any mask or usable area information intact if the location requires masking around obstructions, so the crew is not reconstructing it on the night.
Provide stills as well as motion. A static fallback is genuinely useful if there is a playback problem, and a strong still frame is often what gets photographed anyway.
Name files clearly and version them unambiguously. On a dark street with a deadline, a folder of similarly named files is a real hazard.
Deliver early enough for a technical check before the night. Opening a file for the first time on site is how avoidable problems become expensive ones.
Logos, lockups and brand assets
Brand assets arrive as the thing everyone assumes will be fine, and they are frequently the weakest part of a projection.
Most logo files are built for print and screen, where background control is total. A projection has no background control, because the background is a building. A lockup designed to sit on white, with the mark in a dark brand colour, inverts the entire problem: the dark mark becomes a hole and the white field becomes the lit area, which produces a bright rectangle with a building-coloured logo punched out of it. Sometimes that reads well. Often it reads as a glowing box.
The usual fix is a knockout version of the mark, light on nothing, where the logo itself is the lit element and everything around it stays unlit. Most brands have one. If the version in the guidelines is a single colour mark intended for one background, ask the brand team for the reversed form before the night rather than attempting to reconstruct it on site.
Strapline lockups need the same treatment and usually need to be broken apart. A mark with small descriptive text beneath it, sized for a business card relationship, loses the text entirely at architectural scale. Either set the text much larger relative to the mark, or drop it and let the mark carry alone.
Thin keylines, registered trademark symbols, fine rules and delicate monograms all vanish. Where brand guidelines require them, they should be scaled up rather than reproduced at their usual proportion.
And test the mark against a photograph of the actual wall. A logo in a warm brand colour on a red brick facade can effectively disappear, and that is far better to discover in week one than on the night.
Content and permission
Content is one of the layers in the permission stack, and it is the one creative teams forget exists.
Surface owners almost always want to see what will appear on their building, and sharing it unprompted builds the trust that makes repeat access possible. Discovering an owner objection after production is finished is the most expensive kind of change.
Where projection can run is a genuine grey area that varies by municipality. Local ordinance language around signage and advertising frequently predates the format, enforcement is inconsistent between cities and sometimes between neighbourhoods, and the practical decision maker on a block is usually a property owner, a venue operator or a district organisation. I am not going to characterise any location as permitted or prohibited, and this is not legal advice.
What I will say operationally is that content that provokes a neighbour is the quickest way to make a block hostile to the format for everyone. Crews also check for light spilling into occupied windows and adjust framing, which is partly a content and composition question.
Projection’s advantage is that nothing is left behind. No residue, no removal night, no restoration question. If anyone with standing objects, the remedy is immediate: switch it off. That reversibility is why owners who would refuse anything physical on a facade will often consider light on it.
What we talk clients out of
Repurposing a broadcast or social cut. Different aspect ratio, different pacing, different tonal range, usually a dark grade. It can occasionally be adapted but it is rarely the right starting point.
Dark, moody or cinematic grades. There is no black. A dark grade on a projection is mostly absence.
Fine type and thin weights. They do not survive texture, distance or ambient light.
Long narrative content. Viewers arrive mid loop and leave after a glance. Build for the glance.
Content produced before the survey. The survey tells you the aspect ratio, the usable area, the wall colour and where ambient light will eat detail. Producing before you know those is producing blind.
Insisting on a full brand palette regardless of surface. Choose the part of the palette the wall will carry.
Expecting projection content to do a job it cannot. If the campaign needs detailed information, a phone number, a long proposition or sustained attention, that belongs somewhere else. For a message that needs to travel through a neighbourhood at street level rather than live on one wall for a few evening hours, I would put it on Wheatpasting and Poster Campaigns, where someone can stand in front of it and read.
A practical pre production checklist
Before anyone opens a design application, the creative team should have the following from the survey.
A night photograph of the actual wall, from the intended projector position.
The usable image area and its real aspect ratio.
A map of obstructions, windows, and any section compromised by ambient light.
The surface colour and texture, with a note on how it will tint projected light.
Whether the piece is flat or mapped, and if mapped, the facade model.
The viewing distances and the positions audiences will actually occupy.
The run hours and the season, because that affects the ambient conditions.
The deliverable format, resolution and aspect ratio confirmed with the crew.
That list takes one conversation to produce and it prevents almost every content problem described on this page.
Frequently asked questions
What resolution and aspect ratio should projection content be?
Both should come from the site survey rather than from a standard screen preset, because the aspect ratio is set by the usable image area the wall supports. Producing at a standard ratio and fitting it later means bars, cropping or distortion. Resolution should suit the projected image size, since undersupplying shows as softness, particularly in type.
Why do dark designs fail in projection advertising?
Because a projector adds light and cannot remove it. Black in your artwork means the projector contributes nothing there, so the viewer sees the bare wall, which on a lit street stays visible. Dark and cinematic grades therefore arrive as mostly absence. Content should be designed as light on darkness rather than as a picture containing shadows.
How big does type need to be for a building projection?
Larger and heavier than feels necessary in a layout file. Viewing distance is typically a street width or more, viewers are moving, and surface texture breaks up letterforms, with mortar joints running straight through type on brick. Thin weights disappear entirely. Keep word count minimal and hold key frames long enough for a passing glance to land.
Does the wall colour change how the artwork looks?
Yes, it mixes into every part of the image. Red brick turns projected white pink and makes projected red almost indistinguishable from the surface. Pale render carries close to the full range. Palettes should be chosen against a night photograph of the specific wall, and overlaying artwork onto that photograph catches most problems before production.
How long should a projection loop be?
Short, with the key frames held. Viewers arrive mid sequence, glance and move on, so narrative structure is largely wasted and each portion of the content needs to stand alone. Loops should join seamlessly with no visible jump and no opening that implies the viewer missed a beginning. Slow pacing reads far better than fast cutting.
Can we reuse our broadcast or social content for projection?
Rarely as a starting point. The aspect ratio is wrong, the pacing assumes an attentive seated viewer, and the grade is usually dark, which projects as absence. Some elements can be adapted, particularly bold graphic sequences and logo treatments, but content built against the survey will outperform a repurposed cut every time.
Request a campaign quote
If you have a projection in the plan and creative about to start, the single most useful thing is to get the survey information into the creative team’s hands first.
Send us the locations you are considering and the nights you want to be live. We will survey the walls in daylight and after dark and give your team the usable area, the real aspect ratio, the surface colour, the ambient light map and the deliverable requirements before anyone starts designing.
Request a campaign quote and we will write the creative spec from the actual wall.
Ready to Run Your Campaign?
Call us or email us. Weβll tell you exactly what we can do in your market and what it costs.
Related Service
Explore similar advertising solutions offered by American Guerrilla Marketing.
American Guerrilla Marketing β Los Angeles
Street-level campaigns in Los Angeles and nationwide. Wheatpasting, LED trucks, street teams, and more.
(646) 776-2770
Related Articles
-
Building Projection Advertising Permits Explained
November 22, 2026
-
Billposting: Where It Works and Where It Fails
November 22, 2026
-
Lumens Needed for Outdoor Projection: A Field Guide
November 22, 2026
-
Laser Projection Advertising: A Field Guide From the Crew
November 22, 2026
-
Mobile Projection Advertising Setup: A Field Guide
November 22, 2026